Farm Equipment - Series 3 grain head

Print Page | Close Window

Series 3 grain head

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21856
Printed Date: 31 Oct 2024 at 11:40pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Series 3 grain head

Posted By: waynesuchomski
Subject: Series 3 grain head
Date Posted: 06 Dec 2010 at 7:15am

What is needed electrically to put a series 3 grain head on a older F2 combine? I want to put a newer grain head on my F2 combine

Replies:

Posted By: clint
Date Posted: 06 Dec 2010 at 7:20am

does your f2 have a lever or a switch for reel speed?

-------------
Our farms stuff: agco gt55, AA 8775, 8765, 6080, 185, 180, 175, 170, d15, d14, d14, wd, wd, wd, g, F3, L3, R62

Posted By: waynesuchomski
Date Posted: 06 Dec 2010 at 7:41pm

It has manual hydraulic levers. It does not have electric over hydraulic.

Posted By: wheatbreeder
Date Posted: 06 Dec 2010 at 8:47pm

same heads no change required

-------------
Farm stuff 8050,6690,175,F2,5050,WD

Posted By: DSeries4
Date Posted: 06 Dec 2010 at 9:19pm

I believe you will need some rocker switches and wiring to make the reel speed control work since it does not use the hydraulic line from the combine. A good Gleaner guy would know for sure what you would need and how to hook it up.

-------------
'49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080