Farm Equipment - OMC baler parts....please help!!

Print Page | Close Window

OMC baler parts....please help!!

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21653
Printed Date: 12 Feb 2025 at 10:17am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: OMC baler parts....please help!!

Posted By: Slade (TN)
Subject: OMC baler parts....please help!!
Date Posted: 02 Dec 2010 at 8:50am

Do any of you have any idea where to find OMC baler parts....prefer salvage.... Have a customer that loves his old OMC 590 but needs some parts for next year. If anyone knows of a salvage yard that has some of these, or 1310 Gehl, please let me know. Have checked on new parts (the 1310 Gehl is supposed to be the same) and they were out of the question....

Slade

615-542-6999

call, pm, email, message by homing pigeon....lol....don't matter to me!!

Replies:

Posted By: LannyMTN
Date Posted: 02 Dec 2010 at 7:28pm

Bump

Posted By: Oldoug
Date Posted: 02 Dec 2010 at 7:59pm

You might wanna try Mike's Equipment in Bulher, Kansas. They have a ton of stuff but not for sure all what baler models they have. Colfax Tractor in Colfax, Iowa might be another good one to try.

-------------
Matt Folkers

FOLKERS RESTORATION

Restoring vintage things to last so the future can enjoy our past.

Posted By: Nathan (SD)
Date Posted: 03 Dec 2010 at 2:33am

What do you need? We run a OMC 590 also. I get lots of stuff for it online.

Posted By: Slade (TN)
Date Posted: 03 Dec 2010 at 9:16am

He's needing the roller that also doubles as the door hinge up top.....I haven't seen what kind of damage has been done, it is not here at the shop, it may be repairable, but he wanted me to find another one. Thanks for the replies folks!

Slade

Posted By: Nathan (SD)
Date Posted: 04 Dec 2010 at 12:30am

I have had 4 rollers fixed. Not too hard. Just need someone that can fit the outside diamater in their lathe. Not gonna find one roller too easy. Other than a fire their aint no reason to scrap one.