Farm Equipment - 7060 pto

Print Page | Close Window

7060 pto

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21494
Printed Date: 14 Nov 2024 at 3:59pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 7060 pto

Posted By: Les[wcmo]
Subject: 7060 pto
Date Posted: 28 Nov 2010 at 7:55pm

I will be putting a adaptor on, going from small 1000 to large 1000 size , will 6 grade 8 - 7/16 bolts hold the torque . Any other options?

Replies:

Posted By: Dans 7080
Date Posted: 29 Nov 2010 at 1:20am

I would say so, Theres only 6 bolts holding the shaft in from the factory. My 7060 has the small 1000 I have a 540 adaptor on it, I dont use the power that its putting out (210hp) but I have never had a bit of problem with it

Posted By: Troy
Date Posted: 29 Nov 2010 at 7:07am

you could install a dual speed pto that is safer