Farm Equipment - Power unit

Print Page | Close Window

Power unit

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21475
Printed Date: 14 Nov 2024 at 9:24am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Power unit

Posted By: Juston
Subject: Power unit
Date Posted: 28 Nov 2010 at 4:18pm

Hi I am Juston a new member and I am nine years old. I have a winter project to do on my power unit B-125. First I'll need an owners manual and go from there. It's curently not running, but I'll know it will be a lot of fun getting it running. I will look forward to hearing from other people.

Replies:

Posted By: Brian Jasper co. Ia
Date Posted: 28 Nov 2010 at 4:29pm

Welcome. You found the right place to ask any questions. Check out the store on this site. There should be a manual you need there. Your 125 engine was used in the B, C, and CA tractors so if you have a tractor manual, you have all of the engine info you will need. When it comes to finding parts, Sandy Lake Implement is one of the best places.

-------------
"Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford

Posted By: E7018
Date Posted: 28 Nov 2010 at 5:19pm

Welcome to the group. Lots of knowledge here. And good fellows to share it.
I am not sure what power unit that is but I want to give you a bit of advice. When I was a bit older than you, I broke my wrist cranking a B Farmall tractor. So, if you have a unit that is crank start, find some old guys and have them teach you the proper way to crank an engine. The bad part is, I cut the cast off too soon and my wrist still hurts.

Posted By: David Gibson (OH)
Date Posted: 28 Nov 2010 at 5:21pm

Welcome to the forum.

-------------
David Gibson
http://www.darkecountysteam.com" rel="nofollow - http://www.darkecountysteam.com
1956 WD45

Posted By: Murph-NC
Date Posted: 28 Nov 2010 at 5:27pm

Welcome! We can never have enough young members.

Posted By: norm[ind]
Date Posted: 28 Nov 2010 at 7:48pm

we have 2 power unit for sale an parts also available 1-800-254-3116

Posted By: DREAM
Date Posted: 28 Nov 2010 at 8:45pm

Welcome to the forum Juston. Nice to see some of the younger generation on here. You should be able to get answers to any questions you may have.

-------------
I didn't do it! It was a short, fat, tall, skinny guy that looked like me!