How to clean a rusty camshaft?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21369
Printed Date: 14 Nov 2024 at 3:57pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: How to clean a rusty camshaft?
Posted By: nowaktj
Subject: How to clean a rusty camshaft?
Date Posted: 26 Nov 2010 at 4:24am
|
I have a camshaft for a 262 Diesel that has surface rust on the bearing journals and the lobes.
What is the best way to bring this back to useable condition?
Thanks in advance for the help,
Terry ------------- D19D, D17D, WD, WC, Snobee, #83 Plow, SC Blade, 14' disk, 400 series planter, B , Terra Tiger, M Dozer w/Baker Blade, TL-12, 42S Grader, G |
Replies:
Posted By: Dick L
Date Posted: 26 Nov 2010 at 6:35am
| Soft steel or brass wire wheel. |
Posted By: DMiller
Date Posted: 26 Nov 2010 at 10:10am
| You may need to have it 'Polished' at a machine shop to keep it from destroying itself during operation, as to the journals, if it will not clean off with steel wool I would seriously take it to someone but I will not use a wire wheel on them. |
Posted By: Brian Jasper co. Ia
Date Posted: 26 Nov 2010 at 10:20am
|
Send it off to Berry Cam Service. They're up there in MN somewhere. Do the Google thing... ------------- "Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford |
Posted By: Matt (Jordan,MN)
Date Posted: 26 Nov 2010 at 10:59am
| Barry's cam service is located in Lester Prairie ,MN There phone # 320-935-2377. The machine shop i use takes all there cams and crankshafts to Barry's. I have never had a problem with there work. |
Posted By: Pa.Pete
Date Posted: 26 Nov 2010 at 3:07pm
| You could try toilet bowl cleaner. I worked for years in tool and die shops and we would use it on rusty parts that came out of the wire EDM. Just get a good stiff scrub brush, wear your satety glasses and rubber gloves and scrub away. Make sure you rinse it off good then oil it up, also works on chrome. |
Posted By: Clay
Date Posted: 27 Nov 2010 at 11:00am
| Pa.Pete, which brand of toilet bowl cleaner? I have never heard of that method but it sounds interesting. |
Posted By: Coke-in-MN
Date Posted: 27 Nov 2010 at 11:20am
|
that sounds like how we used coke or pepsi and a rag to buff rust out of chrome bumpers , way back when cars had chrome bumpers . ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: Pa.Pete
Date Posted: 27 Nov 2010 at 11:32am
Most of them are formulated to break down the rust in hard water some may work better than others, I don't remember the brand we used but the thick stuff works best, let it soak on the part for a while then scrub it rinse well and coat with oil.
|
Clay wrote:Posted By: Tricky Dickie
Date Posted: 29 Nov 2010 at 5:48am
|
Some toilet bowl cleaners will remove rust very effectively because many of them contain phosphoric acid, which is the active ingredient of most commercial rust eaters. It's just like using Jenolite or Kingston Kurust, but a whole lot cheaper!
Tricky Dickie
|
Posted By: B26240
Date Posted: 29 Nov 2010 at 7:22am
| Man the interesting things I learn here, I have just removed the gears from a junked WD and they look good except for some rust, ill try the toilet cleaner thing and see what happens! (transmition gears) |
Posted By: Gerald J.
Date Posted: 29 Nov 2010 at 10:24am
|
Rust removers for domestic use USED to have phosphoric acid. Now they don't because of the effects excess phosphorus do in sewage. They don't clean well either. There may be more acid in coke now. Gerald J. |