d17 power
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21361
Printed Date: 14 Nov 2024 at 9:42am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: d17 power
Posted By: panelbeater
Subject: d17 power
Date Posted: 25 Nov 2010 at 7:45pm
does the d17 have enough power to run a pto driven round bale machine?
-------------
http://s2.photobucket.com/albums/y45/panelbeater/
|
Replies:
Posted By: norm[ind]
Date Posted: 25 Nov 2010 at 7:58pm
|
WHAT IS HP. REQUIREMENTS D-17 54 HP.
|
Posted By: darrel in ND
Date Posted: 25 Nov 2010 at 8:03pm
|
It depends on the size of the round baler. A guy in our community bales with a D 17, but his baler only makes about a 3 and a half foot bale. I've done some baling with my D 19 and a New Holland 850, and that's a load for it, I don't think a D 17 would handle it. HTH, Darrel
|
Posted By: acdave63
Date Posted: 25 Nov 2010 at 9:43pm
|
a d 17 might pull a 4x5 on flat ground if your not in a hurry i would think in hill it would have all it wanted i use a 4243 massey on mine sometimes it is 75 pto hp on a 5x6 heston and it seems to handle it ok even on smaller hills
|
Posted By: cbuttre835
Date Posted: 25 Nov 2010 at 9:48pm
I've baled on a 17 Diesel Series IV with a 4x5 case IH baler. no problem. we'd run 15-20 seconds past the buzzer to get a tighter bale, it'd lug down a little bit right at the end....
-------------
C w/ 3rd gear out
D15 II factory 3 point
WD (no motor!)(parts for sale!)
WD 45 wide front
|
Posted By: Dans 7080
Date Posted: 26 Nov 2010 at 1:00am
|
I used an NH 847 auto-wrap on the D19, it makes a 4x5 bale. When the bale was about 2/3 the size of full it would make the old 19 talk. It was flat ground baling.
|
Posted By: panelbeater
Date Posted: 26 Nov 2010 at 5:16pm
thank for the replies, i guess he might pass on it for now
-------------
http://s2.photobucket.com/albums/y45/panelbeater/
|
Posted By: TomSEOH
Date Posted: 26 Nov 2010 at 8:29pm
|
If a D-17 won't pull a small round baler, there's something wrong ! I have baled thousands of bales with a 160 and a 483 (4x4) New Idea or a MF 450 (4x5 closed throat ) I always baled in 2nd or 3rd gear high , hills and flat ground as well. HTH , Tom
|
|