Farm Equipment - Allis C steering

Print Page | Close Window

Allis C steering

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21289
Printed Date: 11 Feb 2025 at 10:17pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Allis C steering

Posted By: Boomer
Subject: Allis C steering
Date Posted: 24 Nov 2010 at 11:11am

In the process of rebuilding the steering on the Model C with Woods L59 mower. There is excessive wear on the steering link ball joints between the gear box and the front pedestal. Does anybody sell this link, or can I go to a cheaper route and weld tie rods from a car onto the shaft, keeping the length the same. Does anybody know how to measure the taper to compare a vehicle cross reference. I know it will be tough to find a similar vehicle tie rod joint because the clearances will be tight.

Replies:

Posted By: pumpkin man
Date Posted: 25 Nov 2010 at 6:50pm

A few years ago at a show had a ( C ) that had redone nice job noticed that the draglink had greaseable ends talked to the man about them he said they were Ford Granada tie rod ends pin had the same taper had them cut and welded on who ever did it did a nice job