Rear wheel weights - D14
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21272
Printed Date: 15 Aug 2025 at 10:12pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Rear wheel weights - D14
Posted By: darrel in ND
Subject: Rear wheel weights - D14
Date Posted: 23 Nov 2010 at 9:46pm
| Finally getting around to putting new rear tires on my D14, only got em a couple years ago. Any way, I was wondering if there is any wheel weights available for the rears on a D 14, as I want to put er together without fluid in the tires, and I know she'll be kind a light without any thing. I don't know if Allis or any aftermarket company made any, but I'm open to all options. Thanks, Darrel |
Replies:
Posted By: Eldon (WA)
Date Posted: 23 Nov 2010 at 10:37pm
|
Darrell pie weights were a factory option....4 x 65#. ------------- ALLIS EXPRESS! This year: |
Posted By: David Maddux
Date Posted: 24 Nov 2010 at 8:22am
| A lot of people used the CA weights on the D-14's and D-15's. |
Posted By: darrel in ND
Date Posted: 24 Nov 2010 at 8:45am
| Thanks for info guys. Eldon, the tires are the ones I got from you, kind a slow at getting them put on. Any one know where I can find a set of the Allis 4 X 65 pie weights? Sounds like just what I want. Darrel |
Posted By: Steve(SEMN)
Date Posted: 24 Nov 2010 at 8:50am
| F & H weights will work #161 or 162's |
Posted By: Brian Ahart
Date Posted: 24 Nov 2010 at 8:55am
Darrel, here is a picture of the AM4485 pie weights (just so you know what to look for): I have an extra set, but don't wish to sell them at this time. You will normally see them priced in the $350-$400 range. Best of luck with your search. http://www.brianahart.net/weights.htm - http://www.brianahart.net/weights.htm ------------- A-C Weight ID reference and other goodies at http://www.brianahart.net" rel="nofollow - brianahart.net |
Posted By: darrel in ND
Date Posted: 24 Nov 2010 at 1:45pm
| Steve, what's the story on F & H weights. Is F & H a company that makes aftermarket ones, and what does the #161 and 162 stand for, are they part numbers? Where do you find F & H weights? Thanks, Darrel |
Posted By: Steve(SEMN)
Date Posted: 24 Nov 2010 at 4:05pm
|
This picture is from a previous post called... d14 options. I copied the picture from it.
These weights do work with other brands of tractors and are reasonably priced. 161's are the outer and 162 are the inner weight if you stack them. The # is stamped in the weight and you can use either of them as singles. They weigh roughly 150 each.
 |
Posted By: jaybmiller
Date Posted: 24 Nov 2010 at 5:04pm
|
Highjacking this post for a weight install question.
My 'new' D-14 has 2" long radial(hairline) cracks from the holes where those pie weights would attach.Am I right thinking if the bolts got loose, that would do the damage?
I'm thinking about welding them up...winter project 23 or 24 .
------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Steve(SEMN)
Date Posted: 24 Nov 2010 at 5:55pm
| Those hair line cracks in the wheel centers come from the vibration of the allis 82 side mowers. My tractor never had wheel weights on it and i had those cracks too. I was told this by a old time repairman. |
Posted By: darrel in ND
Date Posted: 24 Nov 2010 at 6:16pm
| Thanks for the info, Steve. They look like they would work for me. I'd like the original AC pie weights for originality sake, but sometimes cost out weighs originality. (no pun intended!) Darrel |
Posted By: Brad MI
Date Posted: 24 Nov 2010 at 7:15pm
| Darrel, F&H were original equipment for the WC tractors. Also, on a D-14 either of the F&H weights should work. |
Posted By: norm[ind]
Date Posted: 24 Nov 2010 at 7:29pm
| F&H WEIGHTS ROWE FDRY IN ILL. WERE BOTH AFTERMARKET WEIGHT MAKERS |
Posted By: ChuckLuedtkeSEWI
Date Posted: 24 Nov 2010 at 8:19pm
|
Darrel, I have a set of F & H weights, I'd have to look at the number. Can't remember if they are 161 or 162. They are in Wisconsin, but I am going to northern central Nebraska next weekend. That's probably still a world away. I'd like $75 for the set of them. PM me if you're interested. ------------- 1955 WD45 diesel 203322 was my dad's tractor, 1966 D15 23530, 1961 HD3 Crawler 1918, 1966 D17 IV 83495, 1937 WC 41255, 1962 D19 6221 |
Posted By: Steve(SEMN)
Date Posted: 27 Nov 2010 at 8:51pm
Darrel, here is the after market weight that i have on my D14. They are stamped E.ROWE FDRY D15 MARTINSVILLE and weigh 200 lbs. 
|
Posted By: ac160
Date Posted: 02 Dec 2010 at 2:10pm
|
Speaking of wheel weights could you fit AC weights and F & H weights together? How much does an Allis rear wheel weight weigh and the F& H wieghts weigh? I was looking at brianahart.net and it didn't provide that information. |