Farm Equipment - Heading to Georgia

Print Page | Close Window

Heading to Georgia

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21209
Printed Date: 11 Feb 2025 at 6:55pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Heading to Georgia

Posted By: Jeff(WD45-SATX-TN)
Subject: Heading to Georgia
Date Posted: 22 Nov 2010 at 2:31pm

I am driving down to Columbus Georgia on Monday Nov 29. Headed to Pratt & Whitney's Engine facility there. Going down 65 through Birmingham and south through Auburn via US-280. Wanted to do some tractor spotting along the way. Any AC folks on or near that route?

Jeff

-------------
1954 WD45 NF "Iron Tater"

Replies:

Posted By: DREAM
Date Posted: 22 Nov 2010 at 8:06pm

Sorry Jeff, not real close by there. I'm thinking that part of the country is pretty green, but there may be some others on here that can help you out. I have a good friend of mine that just finished a big install job on some overhead cranes at Pratt & Whitney.

-------------
I didn't do it! It was a short, fat, tall, skinny guy that looked like me!

Posted By: Hubert (Ga)engine7
Date Posted: 22 Nov 2010 at 10:02pm

Not real close to me either. Both Dream and I are on the east side of Georgia.

-------------
Just an old country boy saved by the grace of God.