ID for F&H weights
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21204
Printed Date: 14 Nov 2024 at 9:36am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: ID for F&H weights
Posted By: Calvin Schmidt
Subject: ID for F&H weights
Date Posted: 22 Nov 2010 at 1:44pm
|
I was sorting out some weights today and am not sure how I got these weights or what they fit. Brian Ahart only shows the A-C weights.
The F&H 161 is 19" od and 8.5" id with the holes 7" one way and 12.5" the other way.
The DP2628 is 21.5" od and 8 3/8" id with the same bolt pattern.
What do they fit?   ------------- Nothing is impossible if it is properly financed |
Replies:
Posted By: Wil M (NEIA)
Date Posted: 22 Nov 2010 at 2:15pm
The F&H weights I have on my 1958 D 17 are marked W No. 162
  Don't know what the measurements are on the hole patterns.
Could 161 fit a WC or 24 inch wheels?
------------- "Yet there are soulless men whose hand and brain tear down what time will never give again." Anderson M Scruggs |
Posted By: John (C-IL)
Date Posted: 22 Nov 2010 at 2:21pm
|
161 and 162 are both WC weights. IIRC the 161 has a larger center hole to fit over the hub on the spoked wheels and the 162 goes on top of that.
I can't say for sure on the DP2628
|
Posted By: Matt MN
Date Posted: 22 Nov 2010 at 2:45pm
|
I believe the DP2628 was for the John Deere tractors. But they will also fit the same as the #162's
and yes the #161 are the inner weight and the #162 are the outer weight on the WC ------------- Unless your are the lead horse the scenery never changes!! |
Posted By: Wil M (NEIA)
Date Posted: 22 Nov 2010 at 4:29pm
|
Interesting. Learned something new on the 161 and 162's.....
I remember posting back when my pictures were taken (on the old forum) about if those weights would fit on my D17 and the consensus was they would (and they do) but no one ever said anything that I remember about the 162 being a weight for the WC's... ------------- "Yet there are soulless men whose hand and brain tear down what time will never give again." Anderson M Scruggs |
Posted By: norm[ind]
Date Posted: 22 Nov 2010 at 8:06pm
|
161 an 162 weights were a universal weight will fit many tractors ih jd ac,s moline
reason for slotted holes remember them in the 40,s an before my 2 c ents was a competitor to the rowe fdry weights too
|
Posted By: Steve(SEMN)
Date Posted: 27 Nov 2010 at 7:50pm
| Your 161 an 162 f & H weight fit well on the 26 inch (d14 and D15) rims and the 28 inch rims (wc,wd,wd45 and d17). |