Farm Equipment - WD Axle Housing

Print Page | Close Window

WD Axle Housing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=21018
Printed Date: 25 Sep 2024 at 12:29pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD Axle Housing

Posted By: Onslowe in Mo
Subject: WD Axle Housing
Date Posted: 18 Nov 2010 at 7:05pm

Grew up on a WD, but never had to do any brake work on it. Well, I guess the time of blissful ignorance is over, and I will have to deal with that anchor pin. My question is: does the pin need to come out before the axle housing can come off? Probably a dumb question, I never had noticed the pin under there before, along with the retainer, till the other night. Any answers appreciated, thanks.

Replies:

Posted By: D17 owner
Date Posted: 18 Nov 2010 at 7:18pm

Yes, it does because you have to pull out the brake linings out from the top before you remove the axle. Have fun I just did the brakes on my D17 the last couple of nights. The drums had 1/8" grooves in them. It was fun getting them off!

Posted By: allisorange
Date Posted: 18 Nov 2010 at 7:20pm

The pin has to come out and then you can take the brake rod and screw it out and once you take the nut off for your adjustment you can pull the brake shoes out the top. You may have to play with it for a while but they will come out. You don't have to take the housing off unless your going to change a brake drum.

John Carlson

Posted By: Onslowe in Mo
Date Posted: 18 Nov 2010 at 9:24pm

Thanks for the info, John and Eric, I much appreciate it. Now the fun begins.....