6060 rear wheels
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=210048
Printed Date: 03 Apr 2026 at 2:25pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 6060 rear wheels
Posted By: K bockting
Subject: 6060 rear wheels
Date Posted: 12 Feb 2026 at 7:59pm
| Has anyone installed 34” rear cast centers off a 6080 on a 6060? i do know will need longer studs , bolt pattern is the same, center hole on 34” casr center seems to be 1/8” smaller than steel pressed 28” rim. |
Replies:
Posted By: Calvin Schmidt
Date Posted: 12 Feb 2026 at 8:26pm
|
Have a late friend that installed the 34's on a 185 ------------- Nothing is impossible if it is properly financed |
Posted By: IBWD MIke
Date Posted: 13 Feb 2026 at 5:50am
| Have a cousin that has a 6060 with 34's off a 6080. Looks great! It came with the standard 28's. |
Posted By: Gary Burnett
Date Posted: 13 Feb 2026 at 7:09am
| 6060 has a Fiat rear,Fiat 8 lug pattern is metric not like US built tractors.There were certain Fiat built tractors that came with adapters and US pattern wheel centers. |
Posted By: Gary Burnett
Date Posted: 13 Feb 2026 at 7:11am
| Also double check the bolt pattern its very close but not the same on Fiat vs US built |
Posted By: DSeries4
Date Posted: 14 Feb 2026 at 9:12am
6060 and 6080 are both made by Fiat, so shouldn't be a problem. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Gary Burnett wrote:Posted By: Gary Burnett
Date Posted: 14 Feb 2026 at 12:13pm
I'm not familiar with those two models but on some older Fiat built tractors if pressed steel wheels were used they had the metric wheels but if they came with power adjust wheels some used adapters to use US size centers.Just to make life interesting Olivers 1450's could have 3 different wheel lug patterns.
|
Posted By: cornel b
Date Posted: 16 Feb 2026 at 6:55pm
| got some 34 in pressed cemters and power adjust wheels fron a 6060 |
Posted By: K bockting
Date Posted: 16 Feb 2026 at 9:32pm
|
Posted By: K bockting
Date Posted: 16 Feb 2026 at 9:34pm
| Found a nice set. Thanks |