Print Page | Close Window

Taking a 5 bar AC side del rake and making 4 bar

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209825
Printed Date: 22 Jan 2026 at 5:52pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Taking a 5 bar AC side del rake and making 4 bar
Posted By: Darwin W. Kurtz
Subject: Taking a 5 bar AC side del rake and making 4 bar
Date Posted: 22 Jan 2026 at 3:39pm
Long story short- I took out all 5 bars now I need help

I am confused as to what holes the bars should go in to make 4 bars. I thought I had that figured out, but I think I have atleast one bar in the holes for 5 bars.

How far apart should the bars be?   (Physically measure is what I am asking)

On the way home puling it behind my pickup, one of the bars was rusted on a bolt hole that goes into a rake tooth and it broke- so in order to have factory bars and no welds, I decided to make a 4 bar hay rake. I tried to get another bar at the salvage yard with no luck. So now I am making it into a 4 bar rake

Any help would be appreciated- And I don't have a book for it either

Thanks!



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net