Print Page | Close Window

G Creeper again...

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=209661
Printed Date: 11 Jan 2026 at 7:33am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: G Creeper again...
Posted By: tbran
Subject: G Creeper again...
Date Posted: 10 Jan 2026 at 9:54am
Someone refresh the memory of how to determine of this has the creeper or how to shift into creeper gear on a G. I had a customer who just purchased one, and I don't want to give bad info. 
TIA 


-------------
When told "it's not the money,it's the principle", remember, it's always the money..



Replies:
Posted By: Don(MI)
Date Posted: 10 Jan 2026 at 11:46am
Creeper should be far right and Down on the gearshift.

Should be far right (creeper gear) - center 1st gear - left 2nd gear. All of these are if you press the shift lever down.

-------------
Galatians 5:22-24

"I got a pig at home in a pen and corn to feed him on, All I need is a pretty little girl to feed him when I'm gone!"


Posted By: mdm1
Date Posted: 10 Jan 2026 at 12:22pm
You have to kinda roll your wrist down and right instead of just going right and pushing down.

-------------
Everything is impossible until someone does it! WD45-trip loader 1947 c w/woods belly mower, 1939 B, #3 sickle mower 1944 B, 2 1948 G's. Misc other equipment that my wife calls JUNK!


Posted By: SteveM C/IL
Date Posted: 10 Jan 2026 at 1:27pm
My understanding is they ALL have it. Some have to be fished into position to get hooked by the shifter.


Posted By: mdm1
Date Posted: 10 Jan 2026 at 1:59pm
Oh Boy! Get out the popcorn! Sorry I couldn't resist. I believe they all have it also.

-------------
Everything is impossible until someone does it! WD45-trip loader 1947 c w/woods belly mower, 1939 B, #3 sickle mower 1944 B, 2 1948 G's. Misc other equipment that my wife calls JUNK!


Posted By: Gary Burnett
Date Posted: 10 Jan 2026 at 10:30pm
Originally posted by SteveM C/IL SteveM C/IL wrote:

My understanding is they ALL have it. Some have to be fished into position to get hooked by the shifter.

All G's did not have the creeper gear out of about 25 G tractors I've owned over the years think it was 3 of them without the creeper.AC sold a kit to install the creeper in G's so if they had all had them no kit would have been necessary.Back in the 1970's I bought one of those kits from Valley Implement in Harrisonburg VA.


Posted By: mdm1
Date Posted: 11 Jan 2026 at 7:00am
Gary do you know if the ones that didn't have it were early models? I heard once that some of the early ones didn't have it and then they just started putting it in all of them. I have always wondered why they were not all engaged from the factory.

-------------
Everything is impossible until someone does it! WD45-trip loader 1947 c w/woods belly mower, 1939 B, #3 sickle mower 1944 B, 2 1948 G's. Misc other equipment that my wife calls JUNK!


Posted By: Gary Burnett
Date Posted: 11 Jan 2026 at 7:19am
Originally posted by mdm1 mdm1 wrote:

Gary do you know if the ones that didn't have it were early models? I heard once that some of the early ones didn't have it and then they just started putting it in all of them. I have always wondered why they were not all engaged from the factory.

I don't know,dealers probably just ordered them with the creeper since most buyers got them to cultivate with.In the parts book it shows the spacers where the gears went.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net