Farm Equipment - Need overhaul prices for a D19 Gas

Print Page | Close Window

Need overhaul prices for a D19 Gas

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20963
Printed Date: 11 Feb 2025 at 1:39pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Need overhaul prices for a D19 Gas

Posted By: Dipstick In
Subject: Need overhaul prices for a D19 Gas
Date Posted: 17 Nov 2010 at 7:27pm

My friends ex wife's boyfriend thought it would be loads of fun to drop steel b-b's in each cylinder of his D-19. Was till he got caught!. My buddy has been trying to find complete overhaul kits to no avail. I told him there were several outlets on this forum, and he asked me to get prices and phone numbers to give you guys a call. He wants a complete kit including liners, pistons, maybe valves, gaskets, possibly cam bearings, as well as all the normal bearings, wrist pins and etc. Off hand I can't think of what else he might need, but am sure that those of you in the parts business will know what might be required. My e-mail is mailto:klaus@nwiis.com - klaus@nwiis.com . Please work up a listing of parts and prices and send it to me so I can print it off and give it to him. Thank you for your help in this matter! Dipstick or Joe

Replies:

Posted By: Brian Jasper co. Ia
Date Posted: 18 Nov 2010 at 11:24am

Call Sandy Lake Imp. They're a sponsor of this site. I can't say enough good about them for all the help I've gotten in my D17D overhaul.

-------------
"Any man who thinks he can be happy and prosperous by letting the government take care of him better take a closer look at the American Indian." Henry Ford

Posted By: BobHnwO
Date Posted: 18 Nov 2010 at 1:01pm

Tony's Tractors on this site has D19 kits.

-------------
Why do today what you can put off til tomorrow.

Posted By: Matt MN
Date Posted: 18 Nov 2010 at 1:07pm

yes have him contact Tony from Tonys tractor. He will get him going in the correct direction with quality parts.

-------------
Unless your are the lead horse the scenery never changes!!

Posted By: Stan IL&TN
Date Posted: 18 Nov 2010 at 1:18pm

Matt you may want to re-read the post again. His friend has the D19 and the boyfriend did the dirty work on it with the BB's.

-------------
1957 WD45 dad's first AC

1968 one-seventy

1956 F40 Ferguson

Posted By: Tony.Or
Date Posted: 18 Nov 2010 at 3:07pm

Hey guys just for general knowledge, No sleeve kits for D-19 gas. All other parts are available., bearings, valves gaskets, etc .AGCO dosen`t have them either. Tony

-------------
http://www.tonystractors.com" rel="nofollow - http://www.tonystractors.com

Posted By: DonDittmar
Date Posted: 18 Nov 2010 at 3:38pm

Sleeves would be the same as D17 or D19 diesel. Difference was in the piston and head. Sleeves, block, crank, rods should all be the same

-------------
Experience is a fancy name for past mistakes. "Great moments are born from great opportunity"

1968 D15D,1962 D19D
Also 1965 Cub Loboy and 1958 JD 720 Diesel Pony Start