Print Page | Close Window

old ac tractors year of production

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20933
Printed Date: 11 Feb 2025 at 11:06am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: old ac tractors year of production
Posted By: Brad from ks
Subject: old ac tractors year of production
Date Posted: 17 Nov 2010 at 12:02am

I just bought an old  chalmers tractor with a sicle mower infact it has two of them one is a 6 ft & the other is an older 4 ft with a wooden end the marking on the mag sez WICO Model XB I think & the spec is B 4000 or 4004 & the serial no is 044375 what year is it??





Replies:
Posted By: Bill Long
Date Posted: 17 Nov 2010 at 5:47am
Brad,  You may want to give us more information.  If it is a wide front, one row, tractor it would be a B 1940.  Remember, on a B,  the serial number is located above the gear shift lever.  Also, the B is a three speed tractor with a wide front and relatively narrow rear.  The mower is a box type frame that mounts on the tractor with the blade to the right in front of the rear wheel.  A four foot sickle bar would be a custom cut sickle bar since the B came with the possibility of 5' or 6'.  On some rare occasions a 7' sickle bar would be attached.  Does it have a starter and lightsIf you can attach pictures it would be a great help.
Let us know.
Good Luck!
Bill long


Posted By: Brad from ks
Date Posted: 17 Nov 2010 at 6:09am
I was going by the info on the magneto, I'll check out the gearshift asap. Yes it has a 6 volt battery & a key & a guage of some type not sure yet. It has one  headlite on the rightside of the tractor, & i'll also be looking for the serial no by the gear shift. Thanks alot It looks like it's in excellent condition &  the mower on it now is the 6 ft one & in excellent condition as well. The older 4 ft mower is outside but in fairly good shape, the wood on the end of the mower is "kinda" needing replaced lol but all the iron is there & the guards look like new, not one dent, or buckle anywhere. all in all it's a damn nice little tractor, it's always been shed'ed & ran at least an hr or two every year


Posted By: Brad from ks
Date Posted: 17 Nov 2010 at 6:13am
it's a wide front too 



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net