Farm Equipment - Hyd Shift on 2000 Monoframe Plow

Print Page | Close Window

Hyd Shift on 2000 Monoframe Plow

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20909
Printed Date: 11 Feb 2025 at 11:33am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Hyd Shift on 2000 Monoframe Plow

Posted By: KevinON
Subject: Hyd Shift on 2000 Monoframe Plow
Date Posted: 16 Nov 2010 at 4:54pm

I am going to look at a 2000 Monoframe with hyd. side shift on the hitch. If you right tractor wheel is set properly, can this work as a 'vari-width'? Thanks!

Replies:

Posted By: Matt MN
Date Posted: 16 Nov 2010 at 5:03pm

I would say NO, the only thing you would change is the width of the first bottom. All the other ones would not change

-------------
Unless your are the lead horse the scenery never changes!!

Posted By: jb from md
Date Posted: 16 Nov 2010 at 5:11pm

I have a green semi mount plow like that and it really makes it nice when you are plowing on a hillside as you can adjust it for throwing the fur up or down the hill...helps alot...Jb

-------------
8050 FWA, 190XT, 185, Styled wc, Unstyled wc, (2)C, (2)WD45NF, WD45WF, WD,416h, 716h, 312h, 8070 pedal.

Posted By: Amos
Date Posted: 16 Nov 2010 at 5:24pm

I have this on one of my 2000 plows. It is great for straightening out a crook in a furrow. It does work best with your wheel track set as the manual states but it can be used to 'adjust' for the track being incorrect, it just does a crappy job is all this way. Does not work as vari-width.