Construction and other equipment - D 15 series I Industrial 14.9X24 rim

Print Page | Close Window

D 15 series I Industrial 14.9X24 rim

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208960
Printed Date: 09 Jan 2026 at 10:31pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D 15 series I Industrial 14.9X24 rim

Posted By: fglass
Subject: D 15 series I Industrial 14.9X24 rim
Date Posted: 18 Nov 2025 at 12:32pm

Looking for a compatible rear fixed rim 6 hole, 8" across the farthest bolt holes, with a 6" hole in the center. rim edges are 12" across in width.

Thanks for any help

Replies:

Posted By: fglass
Date Posted: 19 Nov 2025 at 4:09pm

CORRECTION ON NUMBER OF HOLES: IT IS Eight (8) Lug holes and 8" across the farthest holes..

Posted By: tadams(OH)
Date Posted: 20 Nov 2025 at 2:03pm

What are combine rims?

Posted By: PaulB
Date Posted: 20 Nov 2025 at 2:06pm

Generally a standard combine rim will not have as thick center as the Industrial tractor will have. However if you look around enough it is possible to find a heavy duty center on a combine rim. Also most combine rims are 26" the original post is looking for a 24" rim.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: orangeman
Date Posted: 27 Nov 2025 at 11:26am

https://www.millertire.com/-" rel="nofollow - https://www.millertire.com/- Orangeman