Classifieds - All Crop grain drill

Print Page | Close Window

All Crop grain drill

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208726
Printed Date: 19 Dec 2025 at 4:23am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: All Crop grain drill

Posted By: only AC orange
Subject: All Crop grain drill
Date Posted: 31 Oct 2025 at 8:40am

Needing repairs for 18 hole All Crop grain drill - specifically, 2 seed cases. that is what meters the seed into the seed tube and then in to the ground. Previous owner apparently used screw driver or chisel to remove degree and punctured case. Thanks

Replies:

Posted By: Simon2
Date Posted: 01 Nov 2025 at 7:07pm

Assume these housings where same on all drills ? Have a mounted parts drill, will check condition

Posted By: only AC orange
Date Posted: 02 Nov 2025 at 6:32am

I am also assuming they are all the same?? I need to replace 2 of them if you have. Thanks

Posted By: im4racin
Date Posted: 02 Nov 2025 at 6:46am

There is a couple different opener housings. Better post a picture

Posted By: only AC orange
Date Posted: 10 Nov 2025 at 5:28pm

According to my All Crop drill parts book, there are some superseded numbers but no change in seed case. The most recent part number is 339944. Does anyone have 1 or 2 of these? I would take picture but drill isn't here and I can't download anyhow. Thanks

Posted By: Lon(MN)
Date Posted: 11 Nov 2025 at 6:00am

Are you talking about the part that the square shaft runs through?

-------------
http://lonsallischalmers.com

Posted By: only AC orange
Date Posted: 11 Nov 2025 at 7:21am

Yes sir! That part meters the seed that goes down thru seed tube and into the ground.

Posted By: Lon(MN)
Date Posted: 12 Nov 2025 at 5:56am

I have some of those, but all my tractor stuff is on hold until I get my house done and moved in.

-------------
http://lonsallischalmers.com

Posted By: Simon2
Date Posted: 13 Nov 2025 at 8:30pm

Sending you PM on drill seed
Parts