Parts for New Idea Loader
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20867
Printed Date: 12 Nov 2024 at 10:28am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Parts for New Idea Loader
Posted By: Steve Wilkens
Subject: Parts for New Idea Loader
Date Posted: 15 Nov 2010 at 10:27pm
| Have a new Idea Loader, just had the cylinders resealed, left the bucket go all the way up and the cast cap that holds the seal that the ram comes out through cracked and shot fluid out. Can I get this cast cap or can it be welded. Would prefer a replacement if there are any out there. Can get a picture of it. The cylinders are about five feet long in the closed position. Dont have the exact specs, but can get them if someone might have the part. you can e-mail me, or call me at 269-275-0309. Thanks, Steve |
Replies:
Posted By: Claus
Date Posted: 15 Nov 2010 at 10:33pm
|
Just wondering if something was put together wrong, it shouldn't have broke. Make sure before you break another one. I don't know which loader you have but New Idea loader parts should still be available. |
Posted By: Steve Wilkens
Date Posted: 16 Nov 2010 at 7:45am
| It was fine until I had them fully extended. Thanks for the advice. |
Posted By: denny sd
Date Posted: 16 Nov 2010 at 8:40am
| Are these two way cylinders or single? |
Posted By: Steve Wilkens
Date Posted: 17 Nov 2010 at 1:33am
| single way cyliners. they are 56 inches long and 3inches dia. |
Posted By: R Aiken
Date Posted: 17 Nov 2010 at 11:42am
Steave, is what you want? I have 2 of them . Richard
|
Posted By: Steve Wilkens
Date Posted: 18 Nov 2010 at 1:37am
| Richard, They look about the right size. But mounting points are different and the cap is different. However, that doesn't mean those caps won't work on my cylinders. Right now I have my cap at the welding shop, but thinking if a replacement cap is avaiable I might want a spare. If the welder can't fix mine, I might be interested in trying your caps. Thanks again Richard, you always amaze me with the depth of your parts inventory. |