Print Page | Close Window

i need some part number identification

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208491
Printed Date: 12 Oct 2025 at 7:13pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: i need some part number identification
Posted By: HudCo
Subject: i need some part number identification
Date Posted: 11 Oct 2025 at 9:38pm
finally back on replacing all the seals and gaskets and o rings on my d17  ,  i ordered sealand gaskets more than a year ago and i am hoping these numbers have superceeded because they dont seam to jive with my parts book  70241179 , 70227679 ,70235253  location and the old numbers if they did supercede would help thanks hud 



Replies:
Posted By: Kenny L.
Date Posted: 12 Oct 2025 at 7:12am
70227679, supercede 224510 is a seal for pto shaft on 2cp,D14,D15,D17,H3,HD3,180,170, 70235253 is a screw for  D19,190 I don't know where it's use, 70241179 I'm no help


Posted By: HudCo
Date Posted: 12 Oct 2025 at 2:10pm
the 70235235 is a seal about 3 1/4 od x 2 1/16 id  on the seal its self is national472409r  mx     the seal in the cnh bag marked 70241179 says national410135rrr mx  2 1/8 x 1 3/4     what i am trying to figure out is the seals for the input shaft agco  parts book says 70256909   and the two seals between the trans mission  and hydralic pump 70241485 agco parts book 234   page 187 in the old allis parts book old parts book is 228192 input and 229282 in the trans      got everyone confused yet



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net