Used & NOS last chance
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208374
Printed Date: 20 Nov 2025 at 12:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Used & NOS last chance
Posted By: PaulB
Subject: Used & NOS last chance
Date Posted: 01 Oct 2025 at 2:10pm
Here are most of the items I'm not going to be hauling to swap meets or GOTO flea markets.  Located in north central Maryland, not far from Gettysburg, Pa. I also have some items not shown. PM me and come take a look. If you see anything you want make a CASH & CARRY offer. The next time I load these on a truck, they'll be on a slow boat to china ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Replies:
Posted By: 55allis
Date Posted: 01 Oct 2025 at 2:40pm
|
Is that a NO 7 sickle mower drive pulley? ------------- 1955 AC WD45 diesel with D262 repower, 1949 AC WD, 1963 A-C D17 series 3 |
Posted By: dr p
Date Posted: 01 Oct 2025 at 6:38pm
| I will take all the plow parts |
Posted By: PaulB
Date Posted: 02 Oct 2025 at 6:12am
|
The pulley up by the D series pump shield is most likely from something Gleaner. I also have other Gleaner parts not shown. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: Jgranat
Date Posted: 03 Oct 2025 at 12:25pm
| Are those 3x15 front rims I see? |
Posted By: PaulB
Date Posted: 03 Oct 2025 at 3:19pm
They are 4X16 six bolt implement rims, not the 3X15 five bolt rims you are searching for. I most likely have 1 or 2 of the 3X15 five bolt rims I'd sell, if you are willing to come get them or meet me at New Enterprise, Pa. where I will be pulling October 11th. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Jgranat wrote:Posted By: 55allis
Date Posted: 03 Oct 2025 at 6:12pm
|
They’re probably for a late d series? What’s the carb for? ------------- 1955 AC WD45 diesel with D262 repower, 1949 AC WD, 1963 A-C D17 series 3 |
Posted By: 55allis
Date Posted: 03 Oct 2025 at 7:58pm
|
What’s in those boxes beside the carbs? ------------- 1955 AC WD45 diesel with D262 repower, 1949 AC WD, 1963 A-C D17 series 3 |
Posted By: PaulB
Date Posted: 04 Oct 2025 at 6:16am
The 6 bolt rims are from a Roto-Baler. The carburetor is from a M Farmall and the little boxes there are Farmall spark plugs. The box next to the Farmall box is _N Ford parts.
------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: 55allis
Date Posted: 04 Oct 2025 at 12:34pm
Do the spark plugs have an IH number on them? ------------- 1955 AC WD45 diesel with D262 repower, 1949 AC WD, 1963 A-C D17 series 3 |
Posted By: PaulB
Date Posted: 12 Oct 2025 at 1:35pm
The snow is coming and the scrap is going. You snooze, you lose. This is only the beginning. Whatever is here this week gets loaded. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: 55allis
Date Posted: 12 Oct 2025 at 4:05pm
|
What’s the shiny lines with the tag for? And the plow shares? And that hydraulic cylinder ------------- 1955 AC WD45 diesel with D262 repower, 1949 AC WD, 1963 A-C D17 series 3 |
Posted By: PaulB
Date Posted: 17 Oct 2025 at 12:57pm
|
I was surprised the tariffs haven't killed the scrap prices yet, like all other commodity prices. I got a little over $200 for the just over a ton of steel and cast I had in separate piles. Now for the next load. ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |