HD6E starter motor
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208363
Printed Date: 16 Nov 2025 at 8:29am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD6E starter motor
Posted By: Dozer987
Subject: HD6E starter motor
Date Posted: 30 Sep 2025 at 1:11pm
|
I received my eBay starter motor today. It is a universal starter that fits many pieces of industrial equipment. The eBay post says it fits an Allis Chalmers HD6G. The gear opening on the new starter is on the wrong side indicating it is set up for installation on the left side of the motor. That should not be a problem because the mounting flange can be re-positioned. Looking at the original motor the curved bendix spline indicates CCW rotation looking at the motor from the gear end. The new motor does not have a visible spline. The eBay posting says the unit has CW rotation. QUESTIONS: Do the HD6G and the HD6E have the same rotation? Am I correct that the HD6E starter rotates CCW? |
Replies:
Posted By: Dozer987
Date Posted: 01 Oct 2025 at 8:39am
The eBay starter and the original
|
Posted By: Dozer987
Date Posted: 07 Oct 2025 at 7:54am
| The eBay starter motor can be configured to fit over 130 industrial applications. eBay security does not allow telephone communication so I could not resolve the issue of the incorrect rotation. I was told that taking it apart to change the relationship between the armature and the field would void the warranty. I have returned the eBay starter motor. I recommend the eBay type starter motor but you have to purchase it from someone who understands the configuration. Most eBay sellers do NOT understand what they are selling |
Posted By: gemdozer
Date Posted: 07 Oct 2025 at 10:07am
| The HD6 startor 24 volt is turning left side and have 2 off them -1 with the shaft twist and wide gear and the second on have a standar shaft and narrow gear |
Posted By: Dozer987
Date Posted: 08 Nov 2025 at 4:25pm
|
The starter worked when I purchased my HD6E but would not turn when I finished working on the clutches. I cleaned the starter commutator with sand paper. The brush springs and brush stands were damaged. I made 2 piece brush stands from 3/8 bolts. I made 2 piece brush stands because it is easier to install the brush springs. 
|