190 top link
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=208030
Printed Date: 02 Sep 2025 at 9:30pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 190 top link
Posted By: Boman
Subject: 190 top link
Date Posted: 02 Sep 2025 at 10:56am
| Does anyone know this, I think the 190 allis used a shorter cat 2 top link does anyone know what the shortest and longest measurements are? |
Replies:
Posted By: DrAllis
Date Posted: 02 Sep 2025 at 11:32am
| Factory 3-point hitch ?? or add-on ?? |
Posted By: TedN
Date Posted: 02 Sep 2025 at 12:17pm
|
My seriesI still has the original top link, but I won't be near it until the weekend. I do know it makes a nice place for wasps to build a nest. On my seriesIII and 7000 I use universal replacements, I think mine came from All States but you can buy them at most implement dealers and a lot of the farm supply stores. As far as I know they aren't much different than anything else. Ted ------------- 190XTD seriesIII, 190XTD seriesI, maroon belly 7000, 190XTD series??? project(or maybe parts) |
Posted By: DSeries4
Date Posted: 02 Sep 2025 at 3:52pm
|
Only 1 top link used as per the AGCO parts book. The 190 uses the same top link as a D17 series 4, 170, 175, 180, 185 and others. I have one I can sell if anyone needs one. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '63 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: 8070nc
Date Posted: 02 Sep 2025 at 4:08pm
|
I need one Donald Matthews 910 824 8856 ------------- 1984 80780 1957 D14 DES 300 with 25000 engine 616 tractor |
Posted By: Boman
Date Posted: 02 Sep 2025 at 5:15pm
| Could you measure it when turned into shortest position please |
Posted By: Boman
Date Posted: 02 Sep 2025 at 5:17pm
Mine is oem three point When I use aftermarket one it does not go short enough for my mounted field cultivator but on my ford it works fine |
DrAllis wrote:Posted By: Boman
Date Posted: 02 Sep 2025 at 5:58pm
Ted it would be great if you could measure it |
Posted By: TedN
Date Posted: 02 Sep 2025 at 6:20pm
|
Unfortunately I don't live with my tractors, I plan to be there Saturday. If I get an opportunity before then I will measure it. Ted ------------- 190XTD seriesIII, 190XTD seriesI, maroon belly 7000, 190XTD series??? project(or maybe parts) |