allis Chalmers 63 snap ring
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=207747
Printed Date: 11 Aug 2025 at 8:28pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: allis Chalmers 63 snap ring
Posted By: Stu K
Subject: allis Chalmers 63 snap ring
Date Posted: 10 Aug 2025 at 4:59pm
|
I am trying to find a snap ring for a 63 Allis pull type rotary mower. I am unable to find any parts diagrams for this model. Anybody have any idea where I could look up parts for the mower? Thanks you in advance.
|
Replies:
Posted By: Stu K
Date Posted: 10 Aug 2025 at 5:00pm
|
The snap ring is for the carrier bearing. |
Posted By: steve(ill)
Date Posted: 10 Aug 2025 at 6:20pm
|
I dont think ALLIS made snap rings.... You get the OD or the ID where it fits, and look on the Standards Chart for Snap rings..
example...  ------------- Like them all, but love the "B"s. |
Posted By: orangereborn
Date Posted: 10 Aug 2025 at 6:38pm
| If that is a pull type with the post on the tongue, I think you might want a 70535544 Ring. There is a 63-3 point - 3 blade.. one piece shaft.. 'different...probably one in the shop if you get a dead end....HTH...Dale |
Posted By: Stu K
Date Posted: 10 Aug 2025 at 7:03pm
|
Yes it has the post for a carrier bearing. It is the pull type variety. Thanks guys for the info |
Posted By: Stu K
Date Posted: 10 Aug 2025 at 7:43pm
|
Dale I am not finding that part, where do you see it? |