Print Page | Close Window

ross - gremmer

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20765
Printed Date: 11 Feb 2025 at 11:51am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: ross - gremmer
Posted By: john2189
Subject: ross - gremmer
Date Posted: 13 Nov 2010 at 9:29pm
HI, I bought a steering box, I think its a gremmer,  to replace the ross steering box on my 45 B. but the steering arm wont fit the tapered spline.  Did I buy a box for a bigger tractor ? or is the taperd shaft differant sizes ?
 
John


-------------
'41 Allis B
'45 Allis B
'49 Farmall Cub
'72 IH Cub



Replies:
Posted By: Bret (OH)
Date Posted: 14 Nov 2010 at 7:44am
If my memory is correct the Ross and Gemmer use different arms. I don't have my parts books at hand but that would be a way to tell for sure.  Maybe bumping this to the top someone will look for ya.


Posted By: MBolton
Date Posted: 14 Nov 2010 at 9:12am
John,
If you in fact do have a Gemmer and have no use for it, I may be interested in buying it. kenneth.bolton@ces.uwex.edu 


Posted By: pumpkin man
Date Posted: 15 Nov 2010 at 7:49pm
  could be off a  C  mounts are the same  shaft is larger


Posted By: john2189
Date Posted: 15 Nov 2010 at 9:15pm
Did the B use the Gemmer box ?  I thought the C box was backwards  of the B box
 
  I put a post in the classifieds for a steering arm for the gemmer , but no replies yet. Are they available ? or very scarce ? should I look for another Ross Box ?  The bearings are bad and the cover plate is broken on my ross.
 
John


-------------
'41 Allis B
'45 Allis B
'49 Farmall Cub
'72 IH Cub


Posted By: GlenninPA
Date Posted: 15 Nov 2010 at 10:06pm
VanCamps sell a repro cover plate online, and the Ross bearings are available through AGCO.......... not terribly priced either...
 
Look in MISC section....
 
http://www.reproducedtractorparts.com/ - http://www.reproducedtractorparts.com/
 
 



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net