Where is the serial number on a D19?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20717
Printed Date: 11 Feb 2025 at 6:40am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Where is the serial number on a D19?
Posted By: nowaktj
Subject: Where is the serial number on a D19?
Date Posted: 12 Nov 2010 at 9:17pm
|
Tractor data says on "top of axle below the seat". I looked....couldn't find it. Can someone give me a more specific location to look?
Thanks in advance,
Terry
-------------
D19D, D17D, WD, WC, Snobee, #83 Plow, SC Blade, 14' disk, 400 series planter, B , Terra Tiger, M Dozer w/Baker Blade, TL-12, 42S Grader, G
|
Replies:
Posted By: Josh(NE)
Date Posted: 12 Nov 2010 at 9:22pm
Behind the seat.
-------------
Allis Express
'65 190XT, 37 B, '72 170, '83 8030, and the IH 560 was a mistake
|
Posted By: nowaktj
Date Posted: 12 Nov 2010 at 9:23pm
Is in actually on the small portion of the axle casting back there?
-------------
D19D, D17D, WD, WC, Snobee, #83 Plow, SC Blade, 14' disk, 400 series planter, B , Terra Tiger, M Dozer w/Baker Blade, TL-12, 42S Grader, G
|
Posted By: Josh(NE)
Date Posted: 12 Nov 2010 at 9:26pm
I believe it is the top of the rear end casting behind the top cover. stamped down so it is readable from above
-------------
Allis Express
'65 190XT, 37 B, '72 170, '83 8030, and the IH 560 was a mistake
|
Posted By: David(Stockbridge)MI
Date Posted: 13 Nov 2010 at 5:40pm
If it has a bracket for the top link of a 3-point set up it is under the bracket.
-------------
All "NEW" Web Site http://www.djstractorparts.com
2035,A,U,UC,WF unstyled,WF styled,WC High Crop (cane),RC,B,IB,C,CA,WD,WD45,G,D10,D12,D14,D15,D15 II,D17,D19,WC styled,WC unstyled H3 crawler
|
Posted By: nowaktj
Date Posted: 14 Nov 2010 at 6:58am
Found it. It was partially under a decal and several layers of paint. Thanks for the help!
-------------
D19D, D17D, WD, WC, Snobee, #83 Plow, SC Blade, 14' disk, 400 series planter, B , Terra Tiger, M Dozer w/Baker Blade, TL-12, 42S Grader, G
|
Posted By: Lonn
Date Posted: 14 Nov 2010 at 5:02pm
Mine has a number on the rear end like normal but also a number stamped at the torque tube flange like a D17 but the numbers don't match. Whats' up with that? all others I've looked at have no number on the torque tube.
-------------
-- --- .... .- -- -- .- -.. / .-- .- ... / .- / -- ..- .-. -.. . .-. .. -. --. / -.-. .... .. .-.. -.. / .-. .- .--. .. ... -
Wink
I am a Russian Bot
|
|