CA cultivator rear depth stop
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=207076
Printed Date: 23 Aug 2025 at 4:19pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: CA cultivator rear depth stop
Posted By: JW in MO
Subject: CA cultivator rear depth stop
Date Posted: 13 Jun 2025 at 4:19pm
|
Does anyone have a picture of the depth stop that mounts between the right rear lift arm and final drive for the rear cultivator bar on a CA? I have an original owners manual but it points to a black blob and doesn’t show a Parts breakdown. This stop mounts in place of the lift cylinder which is moved over and flipped forward to lift the front. My ratchet strap improvision is kinda difficult to set. ------------- Maximum use of available resources! |
Replies:
Posted By: PaulB
Date Posted: 13 Jun 2025 at 7:35pm
|
I used to make them awhile back. I don't know if I have any left or not. I don't have a picture handy in any of my files at the moment. The lower piece is standard pipe of the correct length with a cross drilled hole to go on the hydraulic cylinder pin. The upper piece is a solid rod with an eye on the end than a stop collar. Now if you are really lucky, you may find on of these Oxnard CA adjustable rockshaft stops. This one I have is the only one I have ever seen,  ------------- If it was fun to pull in LOW gear, I could have a John Deere. Real pullers don't have speed limits. If you can't make it GO... make it SHINY |
Posted By: Gary Burnett
Date Posted: 14 Jun 2025 at 6:32am
| Seems like it would work to put hydraulic cylinder collars on the lift cylinders |