Part numbers
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=206902
Printed Date: 01 Jun 2025 at 7:11am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Part numbers
Posted By: Primos75
Subject: Part numbers
Date Posted: 29 May 2025 at 9:29pm
|
Hello all, so in looking at my manual it gives me a 4378031 part number for a copper washer for the injectors on my hd6. The only thing I can find online is a 74378031 number on agkits website. Looks like the same part but says it's for a 6120T engine which mine is not. Seems like I remember reading here somewhere that they started putting a 7 before the part numbers some years ago. I can't remember. Any ideas? Any substitutions? Thanks
|
Replies:
Posted By: HD6 Merv
Date Posted: 30 May 2025 at 3:03am
yes AC numbers need to be of a 8 digit configuration, and this usually involved putting a 7 or 70 in front of number
-------------
tits tyres and tracks
they all cost you money
|
Posted By: Codger
Date Posted: 30 May 2025 at 3:22am
74378031 is a number for a fuel injector copper "gasket" in the book for the Allis engine.
-------------
That's All Folks!
|
Posted By: Primos75
Date Posted: 30 May 2025 at 9:06am
|
Ok, I thought I read that here somewhere. Thanks. Now if I could find them somewhere for less then 22 dollars a piece that would be great..lol. seems a little high for a penny sized washer. I've looked trying to find one similar but no luck yet.
|
Posted By: AC Mel
Date Posted: 30 May 2025 at 9:32am
|
They are available from Minparr...for 16.23 ea. I recently ordered 2 sets....happy to still be able to get them.
|
Posted By: Primos75
Date Posted: 30 May 2025 at 9:51am
|
Thank you, that's why I like this group. Full of info and willing to help. 6 dollar cheaper then what I have found. Ordered 4.
|
Posted By: AC Mel
Date Posted: 30 May 2025 at 11:39am
Tim....good for you!...I also have a Master Numerical Idex for Allis Chalmers part numbers that shows numbers that have changed, It helps occasionally... there are numbers that have been changed that may show up at Minparr....anybody's welcome to bounce numbers of me to see if they've changed...As Merv says it needs to be a 8 digit number...starting with 7.
|
|