7060 hydraulic remote outlets
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=206662
Printed Date: 12 May 2025 at 10:08pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7060 hydraulic remote outlets
Posted By: Ben (MI)
Subject: 7060 hydraulic remote outlets
Date Posted: 11 May 2025 at 8:25am
Are the outlets on a 7060 able to be repaired for leaking? I've not taken one apart. New outlets are over $100. Thanks.
-------------
Part time farming with a 1980 7060 and 1984 F3 hydro.
|
Replies:
Posted By: ryan(IN)
Date Posted: 11 May 2025 at 9:34am
You can put new o rings in them. They may stop the leak they may not.
-------------
ryan
1984 8070 FWA,1979 7060,1975 7040,1971 190,1960 D-17D,1957 D-14, 196? D-19G, 1975 5040,1971? 160,1994 R62
|
Posted By: SteveM C/IL
Date Posted: 11 May 2025 at 10:33pm
|
New orings fixed one of my 8070s that was making a mess at the connection. My other 8070 has the lever lock outlets and one is starting to make a mess so I think I'll try some new orings on it. Not sure that's where it's leaking but orings are cheap and easy.
|
Posted By: Mikez
Date Posted: 11 May 2025 at 11:17pm
|
Think it’s 255040 Oring kit
|
Posted By: Ben (MI)
Date Posted: 12 May 2025 at 11:14am
To do the o rings, how does the remote come apart, please?
-------------
Part time farming with a 1980 7060 and 1984 F3 hydro.
|
Posted By: 8070nc
Date Posted: 12 May 2025 at 12:58pm
If its leaking where the tip for the implement goes in theres no need to take anything apart. I take a pointy pick and get the old oring out and work the new one in
-------------
1984 80780
1957 D14
DES 300 with 25000 engine
616 tractor
|
Posted By: Ben (MI)
Date Posted: 12 May 2025 at 8:14pm
Thanks everyone, I'll try the repair and see what trouble I get in to.
-------------
Part time farming with a 1980 7060 and 1984 F3 hydro.
|
Posted By: Lynn Marshall
Date Posted: 12 May 2025 at 8:40pm
|
Do they leak all the time, or only when you have an implement hose plugged into them? The o-ring seals the male tip to the female coupler body. Your coupler tips could also be damaged or rusty where the o-ring should seat.
|
Posted By: Ben (MI)
Date Posted: 12 May 2025 at 9:37pm
I have one leaking while hooked up only.
-------------
Part time farming with a 1980 7060 and 1984 F3 hydro.
|
|