Farm Equipment - 6080 hydraulic filter o-rings

Print Page | Close Window

6080 hydraulic filter o-rings

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=206474
Printed Date: 28 Apr 2025 at 7:37pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 6080 hydraulic filter o-rings

Posted By: ksucat
Subject: 6080 hydraulic filter o-rings
Date Posted: 28 Apr 2025 at 10:27am

Drained fluid and replaced filters on my new-to-me 6080 yesterday. One new filter (WIX 51831) was fine. O-rings for the second filter(WIX 51652) don’t have a good place to go. Both that came with the filter are larger diameter but thinner than the o-ring on the old filter, so I’m not getting a good seal. Did I get the wrong o-rings with this filter or am I missing a trick to hold them in place?

Thanks

Replies:

Posted By: ac160
Date Posted: 28 Apr 2025 at 3:00pm

Are you speaking of the longer filter? You might need to try a second O-ring maybe or a different one. The new filters aren't providing a good o-ring anymore and might be made slightly wrong. At least that is my guess from when I had the same problem on a 6070.

Posted By: ksucat
Date Posted: 28 Apr 2025 at 3:14pm

The Agco parts book shows the o-ring as a separate part from the filter, and only one ting between the filter and housing. Looks like I reuse the ring off the old filter and toss rings that came with the new.