Construction and other equipment - 615 backhoe thrust washer

Print Page | Close Window

615 backhoe thrust washer

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=206193
Printed Date: 17 Apr 2025 at 12:16pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 615 backhoe thrust washer

Posted By: KRA615
Subject: 615 backhoe thrust washer
Date Posted: 06 Apr 2025 at 5:44pm

Looking for information on the thrust washer, part number 1000237, that goes above the lower spherical bushing where the swing frame connects to the main frame. Nothing on google or in the backhoe service manual. I failed in my effort to attach an image from the parts manual that shows the washer (#2 on the diagram), and it appears to be smaller than the retaining ring above the spherical bushing. My gut reaction is that it should be much larger and thicker than what the diagram suggests. I welcome your thoughts and suggestions, especially any dimensions available. There was nothing left when I separated the swing frame, except for the ball from the bushing (no race) and the snap ring floating around in the egged out hole. I will try again later to attach a photo of the parts manual page. I get as far as identifying the file, but then the system will not allow me to highlight the file to upload.