HD 9 Gear Shift
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=206145
Printed Date: 05 Apr 2025 at 3:59am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: HD 9 Gear Shift
Posted By: Connie
Subject: HD 9 Gear Shift
Date Posted: 03 Apr 2025 at 1:03am
|
Hi, I recenly purchased a HD 9 just wondering if anyone has the gear shift pattern as i am struggling to find it. thanks in advance, |
Replies:
Posted By: Alberta Phil
Date Posted: 03 Apr 2025 at 8:19am
| You would get more replies if you post under the "construction and other equipment" section of the Forum. |
Posted By: Ray54
Date Posted: 03 Apr 2025 at 11:27am
| It has been to long, but I think 1,2,3, and reverse in low and then 4,5,6 and high reverse in the high range. The short lever is the high/low. Cannot remember if high is forward or back. But only 2 choices. |
Posted By: Connie
Date Posted: 04 Apr 2025 at 12:17am
| thanks for that, you don't happen to remember the pattern from left to right at all. |
Posted By: Connie
Date Posted: 04 Apr 2025 at 12:18am
| Hi, Thanks for that, i am new to the forum and im not really sure how to operate it |
Posted By: Les Kerf
Date Posted: 04 Apr 2025 at 7:27am
I found a PDF online of the operators manual for the HD9 and was able to download it; it does NOT give a very clear picture of the shifting pattern though. The manual does state that there are six speeds forward and three speeds in reverse. From the picture it shows the middle shift lever as being the High-Low selector and the one on the right side being the main selector.  |
Connie wrote:Posted By: Les Kerf
Date Posted: 04 Apr 2025 at 7:31am
https://www.tractorparts.com/PDFs/HD9OPERATIONS.pdf" rel="nofollow - https://www.tractorparts.com/PDFs/HD9OPERATIONS.pdf
|