Construction and other equipment

Print Page | Close Window

H-3 Sheet Metal

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=206104
Printed Date: 03 Apr 2025 at 2:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: H-3 Sheet Metal

Posted By: AC7040
Subject: H-3 Sheet Metal
Date Posted: 31 Mar 2025 at 2:43pm

Hello Everyone,

Does the H-3 Crawler use D15 sheet metal? I believe the D14 sheet metal is too small. Looking for replacement sheet metal for the grill, hood, hood sides, and fuel tank. Wasn't sure if I could use the sheet metal from a tractor instead of finding a H-3 donor.

Thanks!

-------------
1953-WD45, 1949-G, 1950s Snap-Coupler All-Crop Drill, 1956 Roto-Baler, 1945 All Crop 60, Snap Coupler Subsoiler, Plow, Gleaner F, 505 wagon

Replies:

Posted By: PaulB
Date Posted: 01 Apr 2025 at 6:59am

Yes; it should. A D15 I gas will have an air cleaner hole on the left side and a round muffler hole. The D15 II gas will have an oval muffler hole on the left and an Air cleaner hole on the right.

I have a gas tank available from a D15 II gas.

-------------
If it was fun to pull in LOW gear, I could have a John Deere.
Real pullers don't have speed limits.
If you can't make it GO... make it SHINY

Posted By: snowman(MI)
Date Posted: 02 Apr 2025 at 5:57am

If you are in need of a grille, I have reproduction D-series for sale. PM for details.

-------------
1950 WD, 1966 D-10 III, 1961 D-10 II, 1966 D-15 II Gas, A-C Minibike, 917 Hydro Mower, 917 Hydro Blower w/cab, West Michigan "Allis Express"

Posted By: Mikez
Date Posted: 02 Apr 2025 at 6:32am

Sent you a email