Construction and other equipment - Looking for Backhoe Bucket

Print Page | Close Window

Looking for Backhoe Bucket

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=206030
Printed Date: 18 May 2025 at 3:14am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Looking for Backhoe Bucket

Posted By: KRA615
Subject: Looking for Backhoe Bucket
Date Posted: 25 Mar 2025 at 8:35am

ISO 24 inch bucket for Allis 615 backhoe. 10 inches between the ears; approximately 14-1/2 inches between 1-1/4 inch pins. Current bucket in really poor condition--I suspect rebuild would cost more than used replacement. I am located in central Ohio, and willing to travel, within reason.

Replies:

Posted By: Jim.ME
Date Posted: 26 Mar 2025 at 6:13am

You may find a good bucket of any manufacturer that meets your needs and modify or have a shop modify the ears to match your current bucket. If you bucket is totally worn out swap the ears to a different bucket.

Posted By: Coke-in-MN
Date Posted: 26 Mar 2025 at 9:49pm

I have the 24" bucket but belongs to my 615 detachable hoe off my HD4 crawler .
Spacing on pins is the same as the AC715 TLB machine I have - I bought a Ford 36" bucket that i need to weld the ears onto off my 34" bucket that was on my 715
Now have a 12" bucket on machine for trenching that I had used on the 615 in the past .

-------------
Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something.
"Challenges are what make life interesting; overcoming them is what makes life meaningful."