Farm Equipment - Seat and arm rests on a 220

Print Page | Close Window

Seat and arm rests on a 220

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=205877
Printed Date: 16 Mar 2025 at 4:46pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Seat and arm rests on a 220

Posted By: Kevin210
Subject: Seat and arm rests on a 220
Date Posted: 15 Mar 2025 at 11:23am

Any one know the trick to getting the arm rests
off the 220 seat.
I know that not all of them are identical but these have
a clamp on them inside the rest and I have it off but can't
for the life of me figure out hot it comes off the metal arm.
Help!!!!

Replies:

Posted By: Alex09(WI)
Date Posted: 15 Mar 2025 at 12:19pm

The flip up armrests are retained to the pivot peg by the sheet metal plate on the back of the armrest held on by 4 sheet metal screws. Remove the screws and plate and armrest will fall off.

^^ above procedure is for Fold-up/High back and Marathon factory seats ^^

-------------
www.awtractor.com
A&W TRACTOR 920-598-1287
KEEPING ALLIS-CHALMERS IN THE FIELDS THROUGH THE 21ST CENTURY

Posted By: Kevin210
Date Posted: 16 Mar 2025 at 11:17am

Got the clamps off ok but it didn't fill off.
I wiggled and turned the first one for what
seemed liked forever and finally used a screwdriver
to get it off the peg.
We may get a different seat w/out arm rests.