Farm Equipment - WD/45 Drawbar PTO shaft.

Print Page | Close Window

WD/45 Drawbar PTO shaft.

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=205847
Printed Date: 29 Jul 2025 at 12:13am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: WD/45 Drawbar PTO shaft.

Posted By: IBWD MIke
Subject: WD/45 Drawbar PTO shaft.
Date Posted: 13 Mar 2025 at 8:36am

So last week sometime we were discussing some sort of mounted implement for these girls. The PTO shaft is supposed to be removed for plows in specific and others too, I think. Anyway, got a P.M. about such. So yesterday while working on the 45's I thought, this might make a good YouTube video? Don't know if it's good but I made one. Hope you guys enjoy!

https://youtu.be/gP46zYAc4Ug?si=R7iZMeI5tQeT4TiX" rel="nofollow - https://youtu.be/gP46zYAc4Ug?si=R7iZMeI5tQeT4TiX

Replies:

Posted By: DrAllis
Date Posted: 13 Mar 2025 at 9:39am

My 50 series 2 x 14's and my 70 series 3 x 14's work fine with the PTO shaft installed on my WD-45. I used a friends 50 series 2 x 14's roll-over plow and the PTO had to be removed for it.

Posted By: jiminnd
Date Posted: 13 Mar 2025 at 11:16am

I have a 2 disc plow, pto has to be removed.

-------------
1945 C, 1949 WF and WD, 1981 185, 1982 8030, unknown D14(nonrunner)

Posted By: IBWD MIke
Date Posted: 14 Mar 2025 at 8:54am

After posting this yesterday, thought the drawbar I had mentioned in the title might be worth talking about. Most guys here know this stuff but somebody might get some good out of it? I've got both 45's in the shop right now so they are getting some love and I see YouTube content..... https://youtu.be/4RdcHlCWUFg?si=AL6IB4HSKBasdJv7" rel="nofollow - https://youtu.be/4RdcHlCWUFg?si=AL6IB4HSKBasdJv7

Posted By: SteveM C/IL
Date Posted: 15 Mar 2025 at 12:10am

Our old 2-16 for the WD uses the drawbar shortened up and pins to it. PTO has to come off....even with the SC conversion.

Posted By: IBWD MIke
Date Posted: 15 Mar 2025 at 8:34am

Well folks, after yesterday's discussion to lift arm latches..... My original plan had been to shoot video of lubing the throw out bearing. Did get around to that but had to have a little self deprecation. Just happy that Doc shares his knowledge with us here.

https://youtu.be/fiL2FQeWcow?si=cHAJPFn1XhyxdaV-" rel="nofollow - https://youtu.be/fiL2FQeWcow?si=cHAJPFn1XhyxdaV-