Harbor freight stud welder
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Shops, Barns, Varmints, and Trucks
Forum Description: anything you want to talk about except politics
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=205624
Printed Date: 12 Mar 2025 at 11:55pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Harbor freight stud welder
Posted By: Thad in AR.
Subject: Harbor freight stud welder
Date Posted: 26 Feb 2025 at 7:52am
|
Anybody tried one. I’m in need but don’t know if I’d ever use it again??? Don’t like to buy Ont time use tools. Any idea of quality? I’ve read good and bad just wanting real world information. |
Replies:
Posted By: jaybmiller
Date Posted: 26 Feb 2025 at 8:07am
|
NOT the HF unit, but body guy's used one for 3+ decades.he uses 1000s of the studs every year. Bought in NC..I call it the porcupine machine..another Canadian invention. Really a simple device not much to go wrong. Bit of a 'learning curve' but it's the PROPER tool for doing quality tin work ! 3 studs removed the dent in ,my #1, D1-14 gas tank 15 years ago..... ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Thad in AR.
Date Posted: 26 Feb 2025 at 8:14am
I have to ask (I’ve been wondering about this) what safety precautions you took to use this on a gas tank? I can see this being used for this purpose. |
jaybmiller wrote:Posted By: JoeM(GA)
Date Posted: 26 Feb 2025 at 8:29am
|
if we ever had to weld on a tank at work, shop rule was empty, blown dry and then dry ice chunks to force fumes out and leave CO2. If you can’t do that, I’d drain, flush, and fill with water JMHO ------------- Allis Express North Georgia 41 WC,48 UC Cane,7-G's, Ford 345C TLB |
Posted By: jaybmiller
Date Posted: 26 Feb 2025 at 9:28am
|
rinsed it several times with water, blew dry. soldered several rider tanks same way. ------------- 3 D-14s,A-C forklift, B-112 Kubota BX23S lil' TOOT( The Other Orange Tractor) Never burn your bridges, unless you can walk on water |
Posted By: Coke-in-MN
Date Posted: 27 Feb 2025 at 2:10pm
|
gas tank welding - empty , rinse , run exhaust from car into tank until to hot to touch , let cool and weld or solder . ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: JW in MO
Date Posted: 27 Feb 2025 at 6:12pm
Got a 96yr old uncle that has been welding gas tanks like that with an ox/acetalyne torch for 70+ years. ------------- Maximum use of available resources! |
Posted By: Ray54
Date Posted: 28 Feb 2025 at 10:41am
|
I have welded on small gas tanks and never a problem. But one mistake is all you may get. Forty years ago, I saw the after math of a mistake. In a tractor junkyard. A 55 gal barrel strapped to water wagon. The barrel was the bigger gas tank for a pump to spray water on construction sites. The consensus was the strap was being cut with a torch. This was a yard that had done very little scrapping, and I know the water wagon had been there years. And a part of town any gas would of been taken very soon. So it was empty, but the old time gas was different than todays. But those fumes went boom big time. The man doing the cutting never made another mistake. I have wondered is using the exhaust from modern clean burning cars still a good way to remove the oxygen from the tank?????
|
Posted By: steve(ill)
Date Posted: 28 Feb 2025 at 4:34pm
|
what comes out of the exhaust pipe is CO ... neither will burn.. The goal is to PUSH all the gas fumes out and leave a blanket of no oxygen... You can also use Nitrogen or CO2.. ------------- Like them all, but love the "B"s. |
Posted By: SteveM C/IL
Date Posted: 28 Feb 2025 at 10:18pm
| I kept the exhaust flowing as I brazed....still here. Not endorsing it..... |
Posted By: Thad in AR.
Date Posted: 01 Mar 2025 at 6:48am
| I wouldn’t be buying this for gas tanks but to use on my truck project. Helps to think about future uses when buying a tool that won’t get used often. |