Question for Ed, s200 SXE R turbo
Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=205525
Printed Date: 21 Feb 2025 at 11:18pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: Question for Ed, s200 SXE R turbo
Posted By: NEVER green
Subject: Question for Ed, s200 SXE R turbo
Date Posted: 19 Feb 2025 at 4:55pm
|
I got a question for Ed, or others. I bought a s200 SXE R turbo for the 8050 my son was pulling in the video. The tech insisted on this turbo knowing all the details on the tractor, Im fine with the 2.3 compressor but it lists the turbine at 2.5, when I measure it its actually quite smaller, it looks tiny. It is smaller then the 3LM by quite a bit, I am worried it wont let enough exhaust out creating high back pressure. The tech is smarter then me so am I worried for nothing?? ------------- 2-8050 1-7080 6080 D-19 modelE & A 7040 R50 |
Replies:
Posted By: injpumpEd
Date Posted: 21 Feb 2025 at 7:53am
|
I sell quite a few of them, and I consider them capable of moving more air than a 3LM466. The turbine housing size is what I match to the cid and hp range though. ------------- 210 "too hot to farm" puller, part of the "insane pumpkin posse". Owner of Guenther Heritage Diesel, specializing in fuel injection systems on heritage era tractors. stock rebuilds to all out pullers! |
Posted By: NEVER green
Date Posted: 21 Feb 2025 at 1:11pm
Thanks Ed, I gat a more accurate measurement of the turbine 2.4, looks so small. ------------- 2-8050 1-7080 6080 D-19 modelE & A 7040 R50 |
injpumpEd wrote: