Farm Equipment - Starting a rebuild

Print Page | Close Window

Starting a rebuild

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20531
Printed Date: 10 Feb 2025 at 8:52am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: Starting a rebuild

Posted By: jshoemaker
Subject: Starting a rebuild
Date Posted: 08 Nov 2010 at 8:40am

I am done with my WC rebuild. The engine is of course real tight and the starter is not spinning the unit very quick. It is a 6 volt system, it will fire, run for a brief while, and die. Should I just keep tinkering and it will eventually take off? Will it become easier to start after it run for a while? Thanks for any tips and help!

Replies:

Posted By: mlpankey
Date Posted: 08 Nov 2010 at 9:36am

sound like its not either getting enough fuel or the coils acting up. on the fuel garvity eventually fills the carbs fuel bowl. but when the tractor is running and drawing more from the bowl than the restricted line is making up.

-------------
people if they don't already know it you can't tell them. quote yogi berra