8030 Steering Cylinder
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204988
Printed Date: 22 Jan 2025 at 5:46am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 8030 Steering Cylinder
Posted By: DSeries4
Subject: 8030 Steering Cylinder
Date Posted: 18 Jan 2025 at 8:34am
|
I am getting the power steering cylinder by my local shop - the piston has several scratches in it. Also need to put new balls and sockets in it. Looking at the parts book, items 19 an 21 both have the same part number (70276006) although they look different. Probably a typo, but can someone give the correct part numbers and how many are needed? Many thanks!  ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Replies:
Posted By: tbran
Date Posted: 18 Jan 2025 at 8:38am
|
70272615 is the correct # for 19
Unfortunately no dealer has in stock - it is NLA - no aftermarket. It is a spacer. ------------- When told "it's not the money,it's the principle", remember, it's always the money.. |
Posted By: DSeries4
Date Posted: 18 Jan 2025 at 8:58am
|
Thanks tbran, do you have any dimensions of the spacer? Maybe I can get my fab shop to make a few up. ------------- '49 G, '54 WD45, '55 CA, '56 WD45D, '57 WD45, '58 D14, '59 D14, '60 D14, '61 D15D, '66 D15II, '66 D21II, '67 D17IV, '67 D17IVD, '67 190XTD, '73 620, '76 185, '77 175, '84 8030, '85 6080 |
Posted By: automaticdave
Date Posted: 18 Jan 2025 at 9:16am
| Series4 that # 19 ID is the same as # 18 bushing, OD is 1>620", thinkness is 0.170" may be wore a wee bit, that shim-washer is tapered on one side maybe for ese of installation |