AC 715B - tie rod ends - and steering ?
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Construction and other equipment
Forum Description: everything else with orange (or yellow) paint
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204896
Printed Date: 22 Jan 2025 at 3:55am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: AC 715B - tie rod ends - and steering ?
Posted By: Coke-in-MN
Subject: AC 715B - tie rod ends - and steering ?
Date Posted: 10 Jan 2025 at 11:05pm
|
Need to replace tie rod ends - anyone have a interchange for the parts or a stock number Also steering seems to wander , and as you correct it the steering wheel will eventually make a full turn just to keep going straight when roading machine . Have always thought it was in the steering control hydraulic steering sector , but know wonder if it's the actual steering hydraulic cylinder has internal leakage which causes the wander of machine . No problem at slow speed or when working machine turns fine and has power to turn wheels in sand, mud or such . Just this having to constantly correct when on road ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Replies:
Posted By: orangeman
Date Posted: 11 Jan 2025 at 8:49am
|
AC 715 Tie Rod Ends P/N's as follows: Number Qty. Description 1007069 1 Rod End, Tie (Left Hand Thread) 1007070 1 Rod End, Tie (Right Hand Thread) Source - AC 715 Loader Backhoe Parts Catalog Form 9003463 12/75. Note this manual is an early manual so when the AC 715B came along - am wondering if there were any rolling engineering changes that would have been covered by a supplement. U.S. Manufacturers - Moog and Delphi Technology's - possibly Minn Parr HTH's ~ Orangeman
|
Posted By: Coke-in-MN
Date Posted: 11 Jan 2025 at 1:16pm
|
PDF file for the 714 / 715 AC Industrial - CDS parts list Now just have to figure out how to convert numbers to industry suppliers https://www.tractorparts.com/PDFs/AC_710C_714C_715C_SN3301-7217_PARTS.PDF" rel="nofollow - https://www.tractorparts.com/PDFs/AC_710C_714C_715C_SN3301-7217_PARTS.PDF ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: DiyDave
Date Posted: 11 Jan 2025 at 3:40pm
|
You might try surplus center, looks like they have quite a variety, from 3/4" down... https://www.surpluscenter.com/shop.axd/Search?keywords=tie+rod+end&page_no=1&page_length=9999" rel="nofollow - https://www.surpluscenter.com/shop.axd/Search?keywords=tie+rod+end&page_no=1&page_length=9999 ------------- Source: Babylon Bee. Sponsored by BRAWNDO, its got what you need! |
Posted By: Coke-in-MN
Date Posted: 11 Jan 2025 at 11:28pm
|
Dave - those are all rod end bearings , the ones used on this tie rod are automotive type and about 1" diameter threads . the stud is a tapered machined surface that wedges into spindle housing ------------- Faith isn't a jump in the dark. It is a walk in the light. Faith is not guessing; it is knowing something. "Challenges are what make life interesting; overcoming them is what makes life meaningful." |
Posted By: steve(ill)
Date Posted: 12 Jan 2025 at 7:54am
|
Coke... if the get a couple dimensions, you might match up here.. https://www.moog-suspension-parts.com/universal_outer_tie_rod_ends.asp" rel="nofollow - https://www.moog-suspension-parts.com/universal_outer_tie_rod_ends.asp  ------------- Like them all, but love the "B"s. |
Posted By: KRAKMT
Date Posted: 21 Jan 2025 at 9:00pm
| If anyone finds the correct ends I would Iike a part number, and if anyone sources new kingpins and bushings I really need to rebuild my hubs. |