Farm Equipment - 190 narrow front housing

Print Page | Close Window

190 narrow front housing

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20464
Printed Date: 10 Feb 2025 at 9:47am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: 190 narrow front housing

Posted By: DougG
Subject: 190 narrow front housing
Date Posted: 07 Nov 2010 at 5:52am

I have a 190 xt , a 67 I believe that has the front block for a narrow front , but no holes to bolt on the pedalistal ; does it have the cylinders in there or is it just the bare housing

Replies:

Posted By: AndrewGubbels
Date Posted: 07 Nov 2010 at 11:00pm

What you have is a blank housing. Where you see the round place what you would think the narrow front would go to is where the shaft would come through for the pedestal. and if you would have the block out of the tractor you could see where the piston would be for the steering setup. I have an interchangeable block I would sell you if you did want one. With everything in it. Thanks!

Andrew Gubbels

-------------
Andrew Gubbels
Gubbels Restoration

Posted By: Nathan (SD)
Date Posted: 08 Nov 2010 at 10:21am

Did that same housing get used till the end of 190 production or did they cast another type later? I have never looked under any 190s.