Farm Equipment - D-17 (IV)

Print Page | Close Window

D-17 (IV)

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20449
Printed Date: 10 Feb 2025 at 9:09am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: D-17 (IV)

Posted By: DiyDave
Subject: D-17 (IV)
Date Posted: 06 Nov 2010 at 7:11pm

Anybody have pictures of the toplink brackets on the D-17-4 tractor? I know that the earlier ones had a bracket, that went under the seat, and attached to the bolts on the front of the diff, but didn't the series 4 have a drilled and tapped set of holes on the back of the diff? Memory is a little fuzzy on this, CRS is kicking in!

Replies:

Posted By: JoeO(CMO)
Date Posted: 06 Nov 2010 at 7:24pm

I have extra angle brackets for top link on a series IV, not needed, will sell, or locate a cast top link bracket from 170, 175, 185. All are secured with 4 capscrews

-------------

Posted By: Ryan Renko
Date Posted: 06 Nov 2010 at 7:32pm

I'm looking for one also!! How many do you have? Ryan

Posted By: DrAllis
Date Posted: 06 Nov 2010 at 7:58pm

The series 4 has a whole different lift arm housing that has a place to attach the top link. Any older D17 has only two 3/8" bolts that retain the PTO shield and up over the top to the 1/2" seat bolts.....that's all there is.