Pulling Forum - allis 200 transmissinon gear tooth count

Print Page | Close Window

allis 200 transmissinon gear tooth count

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Pulling Forum
Forum Description: Forum dedicated to Tractor and Garden Pulling
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204454
Printed Date: 21 Dec 2024 at 8:30am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: allis 200 transmissinon gear tooth count

Posted By: brad7066
Subject: allis 200 transmissinon gear tooth count
Date Posted: 07 Dec 2024 at 5:56pm

dose someone happen to know the tooth count on a 200 transmission. all gears including the constant mesh and counter shaft gears

Replies:

Posted By: WF owner
Date Posted: 08 Dec 2024 at 6:58am

If you click on the link below, you can click on a specific gear and it will give you the tooth count.

I'm guessing other vendors have similar information for ordering gears.

https://www.tractorpartsasap.com/parts-categories/tractor-parts/transmission.html?find=allis-chalmers-200-transmission-gears-shafts-plates-31043392&sid=tauQQ779ct" rel="nofollow - Allis Chalmers 200 Transmission Gears Shafts Plates Tractor Parts | All States Ag Parts

Posted By: DrAllis
Date Posted: 08 Dec 2024 at 7:53am

Input shaft 19 teeth........countershaft gear 35 teeth. 3rd gear top 27 teeth.........3rd gear bottom 23 teeth.

Posted By: brad7066
Date Posted: 08 Dec 2024 at 1:34pm

thank you very much dr allis. by chance would you know what both gears for 2nd are. i need to speed it up. i have d19 bull gears already i will probably have the short pinion shafts made new this year i had them cut to fit in a 4 pinion diff a few years ago. with my bull gears now i think im around 26 to 1. im thinking about having 3rd 24 to 1 and 2nd at 22 to 1. what is your opinion