Farm Equipment - d 17 tire question

Print Page | Close Window

d 17 tire question

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=20440
Printed Date: 10 Feb 2025 at 8:35am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: d 17 tire question

Posted By: elalr
Subject: d 17 tire question
Date Posted: 06 Nov 2010 at 1:20pm

im lookin for a set of 18.4 28 tires. i found a set of 18.4 26 tires on massey rims from a combine ( unknown model) and was wondering if they would even bolt up. if they will bolt up would they be much smaller? hopefully im not the only one on a strict budget and trying to make due with what i can get cheap. thanks in advance

Replies:

Posted By: elalr
Date Posted: 06 Nov 2010 at 1:41pm

i found out the model on the massey. its a 300 combine. thanks.

Posted By: Gary
Date Posted: 06 Nov 2010 at 1:43pm

I have tried a D-15 rim (26") on a WD (28") and it would not work.

Rim rubs on the upper bolts of the axle bearing retaining cap.

Gary

Posted By: bradley6874
Date Posted: 06 Nov 2010 at 2:26pm

we curently run 18.4 26 off a gleanor combine on a d14 it all depends on the set back of the rims ours work fine

Posted By: elalr
Date Posted: 06 Nov 2010 at 6:37pm

what about the bolt pattern? would it be the same possibly? thanks for the info so far.

Posted By: allisorange
Date Posted: 06 Nov 2010 at 6:57pm

We have 18.4-26 off of a john Deere with eight bolt rims that fit right on are D17 but they stick out quite far on each side. We also have 16.9-26 on the other D17 on Gleaner Rims and they work good. I think the rims are off a Gleaner E.

John Carlson

Posted By: elalr
Date Posted: 06 Nov 2010 at 7:04pm

thanks i think i may try them. my rims are in poor shape. these are good tires and rims for $350 for the pair.

Posted By: elalr
Date Posted: 06 Nov 2010 at 10:17pm

does anyone know if i can fit an 18.4 30 tire and rim on it?

Posted By: gcalent
Date Posted: 08 Nov 2010 at 12:17pm

I have 18.4x30 on a D17 and a 175(new model d17) they work fine, the tall tire will change the gear ratio though

-------------
Pullin With AC

Posted By: Skyhighballoon(MO)
Date Posted: 08 Nov 2010 at 1:19pm

My WD45 currently has 16.9X26 8-bolt combine tires and rims on it and it works fine...and yes they stick out pretty much like you set a set of spin-outs set all the way out. Mike

-------------
1981 Gleaner F2 Corn Plus w 13' flex
1968 Gleaner EIII w 10' & 330
1969 180 gas
1965 D17 S-IV gas
1963 D17 S-III gas
1956 WD45 gas NF PS
1956 All-Crop 66 Big Bin
303 wire baler, 716H, 712H mowers