Print Page | Close Window

Dual pump vs. Dual pump service

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204393
Printed Date: 04 Dec 2024 at 1:48pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Dual pump vs. Dual pump service
Posted By: keppy32
Subject: Dual pump vs. Dual pump service
Date Posted: 03 Dec 2024 at 9:50am
On/in the 7040 parts book, what is the difference between these two items/entries? Dual Pump vs Dual Pump Service. Thank you




Replies:
Posted By: ekjdm14
Date Posted: 03 Dec 2024 at 10:04am
To my mind, #246 would be a service replacement unit whereas #244 would be the factory fitted unit. Purely guessing mind & I'm sure folks who actually know will be ready to correct me, but makes sense in my small mind. (For example possibly a different drive coupler or slotted bolt holes allowing for installation without disturbing other parts).


Posted By: SteveM C/IL
Date Posted: 03 Dec 2024 at 10:20am
the gear pump shaft/gears are way different #'s


Posted By: DrAllis
Date Posted: 03 Dec 2024 at 10:32am
Early trans pumps were 13 GPM and later were 17 GPM. Also other improvements all thru the gear pump.


Posted By: keppy32
Date Posted: 03 Dec 2024 at 10:55am
We are looking at rebuilding that pump in our 7040. serial is 70401775. If I try to find all the parts to recreate the seal kit for the pump under the dual pump part listing, I’m unable to find 7 pieces. If I look to find the parts under the dual pump service part listing, all seem to be available. Ultimately looking to see if it’s possible to rebuild our pump using the service pump kit/part listing.


Posted By: NEVER green
Date Posted: 03 Dec 2024 at 11:12am
 Does  anyone know the serial no cut off of the 7040??   Thanks.


-------------
2-8050 1-7080 6080 D-19 modelE & A 7040   R50       


Posted By: DrAllis
Date Posted: 03 Dec 2024 at 7:22pm
7040-5350 is where the newer pump was first used. Always remember unless you bought your tractor new, maybe it already has a newer pump installed sometime in the last 40+ years.



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net