7000 series hood latches
Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204376
Printed Date: 04 Dec 2024 at 4:54am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com
Topic: 7000 series hood latches
Posted By: cowkicker
Subject: 7000 series hood latches
Date Posted: 01 Dec 2024 at 4:11pm
|
Anybody know where to get latches like the ones used to hold the hood sides on the 7000 series ACs , or does anyone know the name of the latch type? Thanks
|
Replies:
Posted By: DougG
Date Posted: 01 Dec 2024 at 4:47pm
|
AGCO - or Mc Master - Carr
|
Posted By: AC7060IL
Date Posted: 02 Dec 2024 at 5:29pm
Cowkicker, Here’s a few weblinks I saw from my internet search for these latches. It seems the original AGCO PART NUMBER was 70228799. I know nothing about any part’s quality or seller info.
EBAY
https://www.ebay.com/itm/333391998535" rel="nofollow - https://www.ebay.com/itm/333391998535
DJStractorparts
https://stores.djstractorparts.com/hood-latch-snap-latch-allis-chalmers-d10-d12-d14-d15-d17-d19-d21/" rel="nofollow - https://stores.djstractorparts.com/hood-latch-snap-latch-allis-chalmers-d10-d12-d14-d15-d17-d19-d21/
AGCO
Agcopartsbook.com subs original part # to 962975.
For AGCO parts book pricing, I see your PM list your location as KY, so I picked a Kentucky AGCO dealership about 82 miles from Frankfort??
For this agcopartsbook directory weblink page for an AC 7010, please scroll down & choose/click page 124 (sheet metal). Once 124 opens & you should see all hood panels. Ok then on that same hood panel page, scroll up & choose/click on “parts list” icon. Choose/click on part 4 to view latch, price, availability, sub#, etc.
https://parts.agcocorp.com/us/en/apbsearch?q=agcoallis/79005649/l&name=7010+TRACTOR" rel="nofollow - https://parts.agcocorp.com/us/en/apbsearch?q=agcoallis/79005649/l&name=7010+TRACTOR
|
Posted By: cowkicker
Date Posted: 02 Dec 2024 at 6:26pm
|
Okay, thanks, will get a couple ordered. Didnt think about checking with Agco as the 7000 series are welded from the factory.
|
Posted By: Lynn Marshall
Date Posted: 02 Dec 2024 at 9:22pm
|
Grind the little pivot rivet head off and punch it out. Do the same with the new one and put it onto the welded piece with a cotter key or roll pin. That way, you don't have to grind off the welded piece and mess up your hood.
|
|