Classifieds - pto driveshaft 7000

Print Page | Close Window

pto driveshaft 7000

Printed From: Unofficial Allis
Category: Other Topics
Forum Name: Classifieds
Forum Description: For sale or wanted items
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204124
Printed Date: 14 Nov 2024 at 7:05am
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com

Topic: pto driveshaft 7000

Posted By: Gary(WI)
Subject: pto driveshaft 7000
Date Posted: 11 Nov 2024 at 7:30pm

Looking for pto driveshaft from pressure plate to pto input. 70260565

Replies:

Posted By: DrAllis
Date Posted: 11 Nov 2024 at 9:42pm

Year ago, there was a clutch rebuilder from NW Iowa,called BMD. I think High Capacity bought them out. They would take your shaft, cut off the splines and weld on new splines for a Farmall tractor like a 966 that also had a 12 inch clutch. They would rebuild the A-C pressure plate and replace the drive hub with a Farmall hub to match the shaft they repaired. Maybe call them and see what they can do.

Posted By: Gary(WI)
Date Posted: 12 Nov 2024 at 6:13am

I am pretty sure reliance bought them out and shut them down..

Posted By: Gary(WI)
Date Posted: 12 Nov 2024 at 6:16am

All States as a rebuilt shaft listed

Posted By: pirlbeck
Date Posted: 12 Nov 2024 at 10:14pm

I am pretty sure BMD was bought out by A&I. BMD was my go to supplier for clutch and TA parts from the time I started in 1976 until they were sold to A&I. At BMD I always talked to a gal named Mary and I remember occasionally talking to her at A&I after they were bought out. I am sure if she answered the phone tomorrow, I would recognize her voice instantly and it has probably been 20 years since I last talked to her.

There was a thread on the Red Power site a couple years ago that discussed the history of the various clutch and TA rebuilders that traced there roots to Bobs Grinding in north central Iowa.

https://www.redpowermagazine.com/forums/topic/145824-past-history-of-bobs-grinding-bmd-aer-vac-allied-precision-hy-cap-and-agparts/" rel="nofollow - https://www.redpowermagazine.com/forums/topic/145824-past-history-of-bobs-grinding-bmd-aer-vac-allied-precision-hy-cap-and-agparts/