Print Page | Close Window

Allis D10 questions

Printed From: Unofficial Allis
Category: Allis Chalmers
Forum Name: Farm Equipment
Forum Description: everything about Allis-Chalmers farm equipment
URL: https://www.allischalmers.com/forum/forum_posts.asp?TID=204086
Printed Date: 13 Nov 2024 at 10:07pm
Software Version: Web Wiz Forums 11.10 - http://www.webwizforums.com


Topic: Allis D10 questions
Posted By: missouri wc
Subject: Allis D10 questions
Date Posted: 09 Nov 2024 at 1:30pm
I recently bought a lot of allis tractors and parts. (mostly wd/wd45). There was a d10 that was included but it is rough shape. The serial number shows it to be a 1961. I do not know anything about the d10s. It does not have a pto and no hydralics. Did any come this way? it also has yellow paint on it so i could be an industrial. Is it worth more to leave as is? How hard would it be to located all the hydraulics and lift and pto for this tractor?



Replies:
Posted By: steve(ill)
Date Posted: 09 Nov 2024 at 1:36pm
there were a couple different VARIATIONS of the D10 along the "industrial" line.. Does the Decals say D10 ?  Or are you saying it LOOKS like a D10... Industrial would be yellow. Could have different front axle or  radiator cove or others.. Does it have spin out rear rims or standard rims... No pto or hydraulics might be a clue.. No good reason to REMOVE them.. probably never had them....... PHOTOS ??

-------------
Like them all, but love the "B"s.


Posted By: steve(ill)
Date Posted: 09 Nov 2024 at 1:39pm
here is a photo from HUTCH in 2007.........




-------------
Like them all, but love the "B"s.


Posted By: steve(ill)
Date Posted: 09 Nov 2024 at 1:41pm
here is another "version" .... called the I40




-------------
Like them all, but love the "B"s.


Posted By: Gary
Date Posted: 10 Nov 2024 at 9:21am

Where is the Gear Box Steering Arm on the I40?

G


Posted By: steve(ill)
Date Posted: 10 Nov 2024 at 9:39am
power steering...

-------------
Like them all, but love the "B"s.


Posted By: Gary
Date Posted: 10 Nov 2024 at 9:47am

1961 D-10 prior to Ser. 3501 would be 138 cu.in., 6 volt electrics.

1961 D-10 Ser. 3501 and up would be 149 cu.in. 12 volt electrics.


The I40 pictured is 1964 or later Ser. III

G


Posted By: missouri wc
Date Posted: 11 Nov 2024 at 7:51am
I will get pictures this week when i get back to the farm. It does have d10 decals and d10 grille. No spin out rims. 



Print Page | Close Window

Forum Software by Web Wiz Forums® version 11.10 - http://www.webwizforums.com
Copyright ©2001-2017 Web Wiz Ltd. - https://www.webwiz.net